We are proud to be an ECORAY
authorized dealer and we offer the Ecoray 60D with Free Shipping for the low price starting at $279.99 with discounts for 2 or more at and up to 279
incentive points per
unit www.vaquatics.net!
NEW
FEATURES:
Wider Angle Lenses
(more light spread)
Super Quiet Fan
Overall Color Temperature 20,000K – 25,000K
Super Quiet Fan
Overall Color Temperature 20,000K – 25,000K
Features and Benefits:
Brighter
than Metal Halide HQI
500+ PAR value at 24″ from center is approximately double that of a 250W Metal Halide HQI. Specially designed lenses provide the best combination of high PAR and light spread. For a 24” deep tank, we recommend one Ecoray 60 for approximately 18” x 13” area to provide 150+ PAR at 24” around the perimeter of the 18” x 13” area, increasing to 500+ PAR toward the center. For larger coverage, place it higher above the water level. Deeper tanks will automatically get larger coverage. 150+ PAR is generally considered to be the minimum lighting requirement for LPS corals while clams and SPS corals generally require 300+ PAR. Do not be confused with many low PAR LED units in the market claiming large coverage area for similar or higher wattage, these units generally produce only 40-100 PAR at 24” from center (one tenth to one fifth the PAR of Ecoray 60). These low PAR LED units do not provide adequate lighting intensity and they are not suitable for reef aquariums with LPS and SPS corals.
500+ PAR value at 24″ from center is approximately double that of a 250W Metal Halide HQI. Specially designed lenses provide the best combination of high PAR and light spread. For a 24” deep tank, we recommend one Ecoray 60 for approximately 18” x 13” area to provide 150+ PAR at 24” around the perimeter of the 18” x 13” area, increasing to 500+ PAR toward the center. For larger coverage, place it higher above the water level. Deeper tanks will automatically get larger coverage. 150+ PAR is generally considered to be the minimum lighting requirement for LPS corals while clams and SPS corals generally require 300+ PAR. Do not be confused with many low PAR LED units in the market claiming large coverage area for similar or higher wattage, these units generally produce only 40-100 PAR at 24” from center (one tenth to one fifth the PAR of Ecoray 60). These low PAR LED units do not provide adequate lighting intensity and they are not suitable for reef aquariums with LPS and SPS corals.
250+
PAR at 24” from center with only Blue LEDs on
Turn on the Blue LEDs only and watch the intense colors of your corals.
Turn on the Blue LEDs only and watch the intense colors of your corals.
Up
to 100 lumens per watt
Latest generation High Power 1 Watt LED produces up to 100 lumens per watt, more than 50% higher lumens output compared to older generation 1 Watt LED. The 60 1 watt LEDs combined are brighter and more efficient than 20 3 watts LEDs, with much lower heat.
Latest generation High Power 1 Watt LED produces up to 100 lumens per watt, more than 50% higher lumens output compared to older generation 1 Watt LED. The 60 1 watt LEDs combined are brighter and more efficient than 20 3 watts LEDs, with much lower heat.
Cooler
operation
With 1 Watt LEDs, an aluminum PCB, a thick aluminum base plate that serves as heat sink and super quiet cooling fan, the Ecoray 60D produces an LED junction temperature of only 56 °C (133 °F), far lower than the 88 °C (190 °F) allowable maximum.
With 1 Watt LEDs, an aluminum PCB, a thick aluminum base plate that serves as heat sink and super quiet cooling fan, the Ecoray 60D produces an LED junction temperature of only 56 °C (133 °F), far lower than the 88 °C (190 °F) allowable maximum.
Modular
design fits most reef tank sizes
Fits most reef tank sizes. For full coverage, place Ecoray 60Ds 4 to 5 inches apart. Get larger spread and wider separation by placing Ecoray 60D higher above the water level. Install either the short or the long side facing the front. For example:
-a tank 3 feet wide by 15” front to back width, would use 2 Ecoray 60Ds with the long side facing the front.
-a tank 4 feet wide by 20” front to back width, would use 4 Ecoray 60Ds with the short side facing the front.
Fits most reef tank sizes. For full coverage, place Ecoray 60Ds 4 to 5 inches apart. Get larger spread and wider separation by placing Ecoray 60D higher above the water level. Install either the short or the long side facing the front. For example:
-a tank 3 feet wide by 15” front to back width, would use 2 Ecoray 60Ds with the long side facing the front.
-a tank 4 feet wide by 20” front to back width, would use 4 Ecoray 60Ds with the short side facing the front.
Save
50% energy
Use at least 50% less energy than 250 W Metal Halide lights, while getting much higher intensity. Generally, replace one 250 W Metal Halide with two Ecoray 60Ds to provide similar light spread.
Use at least 50% less energy than 250 W Metal Halide lights, while getting much higher intensity. Generally, replace one 250 W Metal Halide with two Ecoray 60Ds to provide similar light spread.
Eliminate
Metal Halide bulb replacement costs
Metal Halide requires bulb replacement every 6 to 9 months at a cost of $60 to $80 per bulb. LEDs have life expectancy of up to 50,000 hours.
Metal Halide requires bulb replacement every 6 to 9 months at a cost of $60 to $80 per bulb. LEDs have life expectancy of up to 50,000 hours.
Eliminate
cooling costs
Due to the intense heat generated by Metal Halide lighting, a separate cooling system is usually required that consumes additional energy and expense.
Due to the intense heat generated by Metal Halide lighting, a separate cooling system is usually required that consumes additional energy and expense.
All
Aluminium Housing
The high quality, corrosion-resistant, light weight, all aluminum housing is designed to last a long time over your reef aquarium. Most competitors’ models are made of painted steel which will corrode in 12 months or less.
The high quality, corrosion-resistant, light weight, all aluminum housing is designed to last a long time over your reef aquarium. Most competitors’ models are made of painted steel which will corrode in 12 months or less.
Completely
Sealed Electronics
PCB board, LEDs and all electronics are completely sealed to prevent moisture and air from entering the sealed area. Drivers are located outside the sealed area to allow for easy replacement, if necessary.
PCB board, LEDs and all electronics are completely sealed to prevent moisture and air from entering the sealed area. Drivers are located outside the sealed area to allow for easy replacement, if necessary.
Compact,
Light Weight and Simple
No separate, heavy ballast boxes or an on/off switch. Simply plug the Ecoray 60D into your timer, and then into an electrical outlet.
No separate, heavy ballast boxes or an on/off switch. Simply plug the Ecoray 60D into your timer, and then into an electrical outlet.
Highly
competitve pricing
Specifications:
30 White High Power 1 Watt LED, Color Temperature 12,000K – 16,000K
30 Royal Blue High Power 1 Watt LED, Wave Length 450-460 nms
Overall Color Temperature 20,000K – 25,000K
62 W, 110 V – 240 V, Dual 12 ft electrical cords
Built-in fan
All Aluminium Housing 14” x 8.5” x 2.34”, 8.2 lbs
Supporting L Brackets (not shown in photo) and hanging wire included
30 White High Power 1 Watt LED, Color Temperature 12,000K – 16,000K
30 Royal Blue High Power 1 Watt LED, Wave Length 450-460 nms
Overall Color Temperature 20,000K – 25,000K
62 W, 110 V – 240 V, Dual 12 ft electrical cords
Built-in fan
All Aluminium Housing 14” x 8.5” x 2.34”, 8.2 lbs
Supporting L Brackets (not shown in photo) and hanging wire included
No comments:
Post a Comment